If you’re a PC gamer, you know how important quality thermal paste is. It helps dissipate heat from the CPU and GPU so your computer doesn’t overheat
If you’re a PC gamer, you know how important quality thermal paste is. It helps dissipate heat from the CPU and GPU so your computer doesn’t overheat and potentially damage your hardware. In this article, we are going to discuss how to apply thermal paste.
However, there are a lot of people who don’t know what thermal paste is or why it’s important. Here are some tips to help you apply the cpu paste correctly first time every time.
What is thermal paste?
Thermal paste is a thin, glue-like substance that’s applied to the CPU and GPU. It’s made up of a mixture of low-viscosity thermally conductive paste, metal powders and an adhesive. The purpose of thermal paste is to prevent heat from transferring between the two surfaces which can cause the CPU or GPU to overheat.
If you’re not using thermal paste correctly, it can lead to erratic performance or even damage your computer hardware.
How to apply thermal paste correctly
There are a few things you need to remember when applying thermal paste.
- Apply it in the right direction
Always start by rubbing the thermal paste between your fingers before adding it to the heat sink. This will let you feel whether or not there’s enough paste on the pad or not.
- Don’t overdo it
You shouldn’t be using too much thermal paste at once. Just a thin layer should do the job well. If you’re worried about clumping, dip your finger in some water first and then apply it that way.
- Be patient
The most important thing is to let the thermal paste dry for around 10 minutes before you start installing your heatsink/CPU/GPU back onto its mother board, otherwise you risk damaging your hardware.
The importance of thermal paste
You might think that computers have enough cooling mechanisms built into them, but that’s not always the case. If your computer is a desktop with a CPU and GPU, then you need thermal paste to help keep the temperatures under control.
Thermal paste does two things for your PC:
-It helps to cool down the heat generated by the CPU and GPU
-It helps spread those cool temperatures throughout your computer so it won’t overheat
If you’ve ever seen a laptop overheat because of its limited cooling capabilities, then you know how important thermal paste is. It’s also worth mentioning that thermal paste can also be used on other types of hardware as well.
Now you might be thinking about how this all works. Thermal paste is actually pretty simple to use—just follow these steps:
Step 1: Prepare your materials
-Remove old or dirty thermal paste off your CPU and GPU with a cloth or tissue paper
-Wipe down all the mating surfaces with a light solution of alcohol
Step 2: Apply new thermal paste onto your CPU and GPU in small amounts, working from the center outwards towards each corner Step 3: Allow some time
Tips to help you apply it correctly
You should always refer to the manufacturer’s instructions when applying thermal paste.
If you’re using a metal or metal-based heatsink, then ensure that you have a ‘metal base plate’ for your CPU prior to applying the paste.
The most common mistake people make is not applying enough thermal paste. This can cause the CPU or GPU to overheat and potentially damage your hardware.
How to avoid common mistakes.
Don’t get thermal paste on your fingers: If the thermal paste is too thick, it will be hard to spread evenly over the surfaces of your CPU and GPU.
Don’t use too much: Too much heat can cause your computer to heat up quickly and potentially burn out.
Don’t let it dry out: If you allow thermal paste to dry up, it will not be as effective at dissipating heat.
Get the right tools for the job: You need a spatula-type tool that has a handle with good grip so it doesn’t slip out of your hand when you apply thermal paste.